My Z-wave migration to Home Assistant

[kfly]

Just finished moving from CQC/Smartthings to Home assistant with CQC as the front end.
CQC seems to work just fine including as a secondary controller on the Home Assistant Z-wave network.

My zwave setup:
Home Assistant(Yellow):
Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10
 
CQC:
Aeotec Z-Stick Gen5, Z-Wave Plus USB
 
I had to migrate 40+ Z-wave devices including lights, blinds, etc.
So after migration and you will just need to in CQC:

• Do an include/exclude for the CQC Zwave stick to join the HA new Zwave network.
  
• rescan each unit on the zwave driver client interface and also update names with new unit id's
  
• Obviously leave the device names in CQC the same as you will need to rename each device as the device ID’s will change on the new Z-wave network.
  
• I couldn’t get my locks to work after migration on CQC so moved them to the new HA CQC rest Polling Driver in CQC(Schlage  BE469).
  

 
Since you need to correlate the CQC ID to the HA ID(not sure why you cannot see the Zwave ID in HA) 
Just run this template once in Home Assistant and print out. Will give you all the device names and ID’s. Then just go in CQC and rename starting at device 2,3,4,5,etc. (see below)
I have noticed a bug/feature in CQC that if the device is already named and there is no longer a device at that ID you cannot rename:

• Manual set the device type and then do an approve all.
  
• Then change name and do a save.
  

 
 
HA template (in developer tools) to list device_id and names:
https://community.home-assistant.io/t/ad...ces/374502
 
{% set ns = namespace(devices=[]) %}
{%- for device_id in states | map(attribute='entity_id') | map('device_id') | unique | reject('eq', none) %}
{%- set identifiers = device_attr(device_id, 'identifiers') | list | selectattr('0', 'eq', 'zwave_js') | selectattr('1', 'search', '^([0-9]+)-([0-9]+)$') | list | first | default %}
{%- if identifiers %}
  {%- set node = identifiers[-1].split('-')[-1] | int %}
  {%- set ns.devices = ns.devices + [(node, device_entities(device_id))] %}
{%- endif %}
{%- endfor %}
{%- for node, entities in ns.devices | sort(attribute='0') %}
{{ node }}:
{%- for entity in entities %}
- {{ entity }}
{%- endfor %}
{% endfor %}


Very happy my CQC touchscreens work great with HA and any new devices or other HA devices(zigby,etc) can be access via the Rest API Home assistant driver in CQC.
Good luck
Kevin